The US Mint has been producing dimes since 1796. These coins have been through six major alterations since then, the latest 1946. These dimes portray Franklin Roosevelt and are more detailed than their predecessors.
The 1967 dime belongs to the same series, giving collectors a beautiful design and nostalgic American history. These 10% cupronickel coins contain 91.67% copper and a covering of an alloy with 75% copper and 25% nickel.
These dimes are 1.35 mm thick and have 118 reeds. Each 1967 dime weighs 2.268 grams with a diameter of 17.91 mm.
The design on both the obverse and reverse sides of 1967 is created by a popular engraver, John R. Sinnock. It showcases multiple American symbols with elegance.
The coin’s obverse side features a left-facing portrait of Franklin Roosevelt, the 32nd US President. You can see the inscription “LIBERTY” to the portrait’s left. The bottom of a 1967 dime showcases the mint date and the inscription “IN GOD WE TRUST.” The engraver’s initials JS are present toward the dime’s bottom-right.
As all dimes in 1967 were produced by the Philadelphia Mint, they do not carry any mint marks.
The reverse of a 1967 dime features a torch at the center, surrounded by the inscriptions “UNITED STATES OF AMERICA” and “ONE DIME.” The lower end of this side features the motto of “E PLURIBUS UNUM.” You can also see other American symbols like an oak and olive branches on a 1967 dime’s reverse.
Philadelphia Mint was the only mint to produce these dimes in 1967. It produced over 2.2 billion such coins, most were minted with regular strikes and Full Bands. However, less than two million of these coins were minted especially for collectors and belong to a Special Mint set.
Let us have a look at the value of different 1967 dimes:
While all of the 1967 dimes were no mint mark coins, the quality of these coins varied, leading to different dimes carrying different values. These dimes are fairly new compared to vintage American coinage, so they are quite affordable for collectors.
Most of these no-mint-mark dimes can be purchased at face value. A few coins ranking better can fetch you a value of $0.15 to $0.75 today.
Here is how much value 1967 dimes carry with Mint State (MS) grades:
The 1967 dimes minted with Full Bands are loved by collectors worldwide. These better-struck coins have more defined transverse lines on the torch engraved on the reverse.
1967 dimes with Full Bands carry a greater value than the normal no mint mark coins. Here is a glimpse of the value you can get from different coin grades:
SMS stands for Special Mint Set. These are the special dimes minted for coin collectors. The dimes containing cameo contrast are valued higher than the normal SMS coins.
Here is the value different 1967 SMS dimes can give you:
If you are lucky to find a rare MS 69 CAM dime, it can fetch you a value ranging from $2,750 to $4,500.
If you want to make quite a fortune from a 1967 dime, you should look for coins with rare errors. Mintage errors make these coins rare, thereby increasing their value.
Here are some common errors in 1967 dimes and the value of these coins:
This is a common error where the design elements on the dime’s obverse side are doubled because of the blank’s misalignment. Such a 1967 dime in an AU condition was sold for $600 in 2019.
Coins with this error (die adjustment strike dimes) are a result of recalibrated machinery needing adjustments. These 1967 dimes are valued at around $100 to $150 today.
These 1967 dimes lack the silverfish outer layer, giving them a penny-like appearance. You can get anywhere between $60 to $150 for a dime missing its obverse-clad layer.
This mintage error occurs when a planchet (blank) becomes off-center, leading to a partial design. Depending on the rarity of these dimes, they are valued between $30 to $100.
These 1967 dimes lack an elliptical-shaped part from their surfaces. Such a cut in a coin’s edge is often due to an incorrectly fed planchet. Dimes with this error can get you anywhere between $35 and $40.
As the name suggests, these dimes are struck on a blank planchet, leading to no visible design elements. Lacking aesthetic appeal, such coins rarely fetch collectors a high value.
The planchet rim of these dimes is struck more broadly than the rest, mainly due to a broken or improperly positioned die collar. Such coins contain stretched-out and wide design elements. You can get $5 to $10 for 1967 dimes with this error.
Let us now explore the most important factors determining the value of a 1967 dime:
1967 dimes that are not easily available will always be more valuable. This is why coins with mintage errors are valued higher than the normal ones.
Reputed third-party grading services like NGC and PCGS determine the condition of 1967 dimes by giving them different grades. Coins carrying higher grades are better in condition and are more valuable.
Ultimately, the demand for any asset determines its value. From rare mintage errors to historical significance, the 1967 dimes demanded more by collectors and investors are bound to carry a higher value.
While the value of a normal 1967 dime may not be too high, you can look for special edition dimes for your coin collection. If you already have a fairly old coin collection, you may already be harboring a rare 1967 dime that can get you a few thousand dollars. If you find such a coin in your collection or want to collect one, approach a trusted precious metals dealer immediately!
Such precious metal bullion is a delicacy in the market. The options and designs available currently makes the market more psychodynamic and volatile. BOLD offers bullion carrying the latest market trends, demand, and significance at the best prices! Explore the newest jewelry collection and get yours at discount prices today!
Affiliations
Copyright BOLD Precious Metals 2024
